合肥TS16949质量认证 合肥铸锻厂通过ISO/TS16949质量管理体系(二阶段)认证审核 发布时间: 2015-01-22 13:13 点击:

合肥TS16949质量认证  合肥铸锻厂通过ISO/TS16949质量管理体系(二阶段)认证审核
Hefei TS16949 quality certification Hefei Casting and forging factory passed ISO/TS16949 quality management system certification audit (two stage)
认证公司专家组对安徽合力股份有限公司合肥铸锻厂ISO/TS16949体系(二阶段)进行认证审核。此前,合肥铸锻厂已于5月26日顺利通过一阶段准备性审核。
Certification company expert group on the Anhui joint Limited by Share Ltd Hefei casting and forging factory ISO/TS16949 system (two stage) certification audit. Previously, Hefei casting and forging factory in May 26th passed the stage of preparation of audit.
审核专家按照过程审核的方式,重点对工厂主要从事汽车类铸件生产的静压和树脂砂事业部进行现场审核,特别针对生产过程的各工序用一天半的时间进行跟班审核,涉及所有班次,充分体现了ISO/TS16949质量体系远高于ISO9001质量体系对过程管控的要求,也对工厂质量管理提出了更高的要求。
Audit expert according to the way of process audit, focusing on the factory mainly engaged in the production of automobile castings of static pressure and resin sand Division on site audit, especially for the production process for a day and a half of the valet audit, involving all shifts, fully embodies the ISO/TS16949 quality system is much higher than that of ISO9001 quality system to process control requirements, also put forward higher requirements of factory quality management.
审核组还对各职能部门涉及的顾客特殊要求的评审、顾客绩效、关键绩效指标和趋势、顾客满意、APQP活动开展情况、MSA、SPC等内容进行了审核。通过三天细致的现场审核,在各部门积极配合下,认证审核(二阶段)工作顺利结束。
Customer specific requirements review group of the various functional departments to review, customer performance, key performance indicators and trends, customer satisfaction, APQP activities were MSA, SPC, the content of audit. Through on-site audit three days of careful, in various departments actively cooperate with, the certification audit (two stage) the successful conclusion of the work.
在审核末次会上,审核组对铸锻厂ISO/TS16949体系质量管理的建立和运行情况给予肯定,也对顾客要求识别、模具的细化管理、过程控制和五大工具的运用等内容提出了改进建议和开出一般不符合项,并宣布铸锻厂在对开出的不符合项提出书面验证后给予推荐注册。
In the audit at the last meeting, the audit group affirmed the establishment and operation of casting and forging factory ISO/TS16949 quality management system, but also to customer requirements identification, die thinning management, process control and the five tool content put forward the improvement proposal and opened a general non conformity items, and announced the casting and Forging Factory in open do not accord with a forward written verification given after the recommended registration.
解明国厂长对审核专家的工作表示感谢,并要求全厂各单位对审核发现的问题和不符合项举一反三,加以纠正和预防,使工厂ISO/TS16949质量管理体系不断完善,以顺利获得认证证书
Explain the country director of audit expert work thanks, and asked all units of the whole factory audit found problems and not conform to infer other things from one fact, corrected and prevention, make the factory ISO/TS16949 quality management system continuous improvement, in order to smooth certification.
合肥TS16949质量认证  合肥铸锻厂通过ISO/TS16949质量管理体系(二阶段)认证审核
Hefei TS16949 quality certification Hefei Casting and forging factory passed ISO/TS16949 quality management system certification audit (two stage)